RUGGED. DESIGNED FOR EXTREME ENVIRONMENTS.

Conventional Rear Vision Cameras can be damaged by vehicle washing brushes. Gatekeeper’s Rear Vision Camera was designed with 10 Gage T6 aluminum, making it lightweight and virtually indestructible in any rear vision application.

Complete System

The Gatekeeper Rear Vision System comes complete with a choice of either the standard rear vision camera or a TXM exterior camera, an LCD viewing monitor, and cabling to allow for an easy installation. Additional cabling can be ordered to connect the camera to a Gatekeeper DVR.

Clear Imaging – Even in Complete Darkness

The cameras  (standard rearview camera or TXM camera) are IP 67 rated and produce a reversed image for correct viewing orientation. The cameras have s a wide-angle lens (150° viewing angle) and comes with IR LED’s to provide illumination in complete darkness. 

An optional billeted shroud is available for the standard rear vision camera. The shroud provides additional protection for the camera when the vehicle is subject to automated wash racks with spinning brushes.

DISPLAYS SPECIFIC CAMERAS

The LCD flat screen monitor is available in either 7” or 9” sizes. The monitor has a built-in quad switcher and external trigger lines that when activated (+12V nominal) will cause the monitor to display a specific camera image. For example, the rear camera can be displayed when the vehicle is in reverse, or the camera over a specific door displayed when the door is opened. When camera trigger signals are all removed the monitor will display a black screen. 

MULTI-CAMERA FUNCTION

The monitor has four video inputs. Using one of the four video inputs for the rear vision cameras, up to three additional cameras can be connected to the monitor. The operator-controlled monitor can display a single camera full screen, up to four cameras in a quad view format. By using Y cables,  the video can be simultaneously viewed on the monitor and recorded to a DVR located in the vehicle.