FULLY ADJUSTABLE DOME CAMERA
- 800 TVL color day / night camera
- Integrated microphone to capture audio
- 24 IR LEDs for illumination at night
- Vandal resistant metal housing
- 3D gimbal functionality
- Sony Mega Pixel CMOS Image Sensor
- Easy installation and integration with Gatekeeper DVRs
VANDAL RESISTANT DOME CAMERA
The S370 camera utilizes Sony imaging technology to deliver superior video quality in both day and night lighting conditions. A full-metal vandal resistant design protects the lens and circuitry for long lasting performance.
Its unique 3D gimbal allows the base of the camera to be mounted in any orientation such as curved bus ceilings, allowing the camera to be adjusted so the image is correctly oriented. Unlike conventional camera designs, the S370 provides flexibility and outstanding imaging allowing you to capture any incident anytime.
CAMERA – HOUSING FEATURES:
The Gatekeeper S – Series camera housing includes an integrated microphone allowing high quality audio to be captured at each camera.
The integrated IR utilizes 24 infrared LED’s to provide IR illumination at night. A sensor in the camera detects the ambient light and automatically turns on/off the IR LED’s as needed.
The housing inherently implements a 3D gimbal design found in more expensive cameras. This allows the base to be mounted in almost any orientation while allowing the camera to be adjusted so that the image is correctly oriented.
TAMPER PROOF ADJUSTMENTS
Not only is the camera constructed of metal but there are set screws that when tightened, prevents the camera aim from being tampered with. This is important for installation where the camera can be accessed, either due to low ceilings or accessible camera placement.
ALL METAL HOUSING
An all metal housing creates a vandal proof package that is resistant to physical damage.
90 DEGREE AIMING
The housing profile has been carefully designed so that the camera can be aimed 90° laterally and have a clear field of view. This is important for correct aiming when the camera is located at the front of a bus.
TOLERANT TO INSTALLATION ERROR
The S – Series housing has been designed so that the camera ball cannot be positioned behind the cameras shroud thus reflecting infrared light back into the lens. This reduces the probability of installation error.
The ball that houses the camera electronics has no vents thus making the camera resistant to water spray.
In order to help reduce camera vibration, a rubber mounting ring is supplied. The rubber ring is installed between the camera base and the mounting surface. The rubber ring conforms to the camera base for easy alignment and quick installation.
FLEXIBLE CABLE ROUTING AND MOUNTING OPTIONS
The S-Series camera is secured with 4 screws that are not accessible once the installation is complete. The camera’s signal cable can be routed directly up through the camera base, so that it’s not exposed. Alternatively, there are 4 cut outs in the base that allows the camera’s signal cable to be routed out the side of the base. This is useful when the camera is mounted to a surface that is not accessible from the rear.
INTERNAL IR LIGHT LEAKAGE ELIMINATED
On the front of the S-Series camera is a flat lens that protects the camera lens from the environment. This flat lens is divided into two concentric circles. The outside circle allows the IR light to exit the camera. The inner circle allows the cameras imaging element to view the scene. A cylindrical sleeve is attached to the flat lens, and delineates the outside and inside circle. This cylinder extends from the flat lens and surrounds the camera lens. This mechanical assembly eliminates internally reflected IR light. Some camera designs have no such mechanism, while other designs use a soft rubber boot that is intended to prevent internal reflected IR from entering the camera lens. In Gatekeeper’s experience, a rubber boot can allow IR light to enter the lens and cause optical flare. This can be exasperated as shorter lens sizes are used. The cylinder shroud used in Gatekeeper’s S – Series cameras that protects from internal reflected IR’s still maintained, when shorter lenses are implemented.
|Imaging Sensor||1/3″ Sony 1.27 Mega Pixel CMOS|
|Minimum Illumination||0.1LUX/F1.2 (no IR), 0.0LUX (IR On)|
|Effective Pixels||976(H) x 494(V)|
|Video Output||1.0V P-P/75Ω, NTSC|
|S/N Ratio||≥50db (AGC off)|
|Electronic Shutter||1/60 to 1/100,000, auto|
|Audio||Yes – Integrated mic and line driver|
|IR||24 LEDs (850nm) with integrated on/off sensor|
|Housing||Gatekeeper’s S3 camera housing|
|Lenses Available||2.8mm, 3.6mm, 4.3mm, and 6.0mm|
|Voltage Consumption||12v nominal ≤ 3.5W with IR on|
|Dimensions||2.8” high x 3.6” base diameter (7.11cm x 9.14cm)|
|Weight||.5 lbs (215 g)|
|Operating Temperature||-22°F to +131°F (-30°C to +55°C)|
|Operating RH||Under 90% non-condensing|