+1 888 666 4833
TX242 IP v3 1080p Camera

HIGH DEFINITION. BUILT TOUGH. 2MP IMAGING.

  • 1080P (1920 x 1080) @30 fps
  • True WDR – Wide Dynamic Range
  • Tamper-resistant, secure settings
  • Industry-standard RJ45 network connection
  • Easy integration with Gatekeeper DVRs
  • Internal web server for manual configuration
  • IP69K – dust and waterproof – exterior vehicle mounting and withstand powerful high-temperature water jets
  • USA – National Defense Authorization Act (NDAA) compliant

RUGGED DESIGN TO WITHSTAND ALL WEATHER CONDITIONS

The TX242 IP v3 is a 1080p high definition, wide dynamic range IP camera that is compact in size and lightweight. The camera produces stunningly clear images in the most demanding conditions. Wide Dynamic Range technology provides class-leading imaging performance. The image capture and processing system provides high-quality video with an enhanced dynamic range that significantly improves image quality in scenes consisting of both bright and dark areas.

Built rugged, the camera is designed to operate over the extreme temperatures and vibration found in vehicles. The TX242 IP v3 metal housing makes the camera vandal resistant and when installed virtually immune to tampering.

Camera configuration is easy when used with Gatekeeper’s of IP mobile DVR’s “fast setup” configuration feature. No more struggling with IP addresses, subnets, and default gateways to get the cameras to work. This means that one does not have to have network training in order to install and maintain the system.

The TX242 IP v3 camera is plug and play compatible with Gatekeeper’s G4-Series IP DVRs with power over ethernet using industry-standard RJ45 or M12 connectors (no proprietary cabling) which allows the use of Cat 5 cabling between the camera and DVR. Cable lengths of 15’, 30’ 45’, and 60’ with strain-resistant over molded connectors are available.

INTEGRATED IR

The integrated IR for illumination at night. A sensor in the camera detects the ambient light and automatically turns on/off the IR LED’s as needed.

TAMPER PROOF ADJUSTMENTS

Not only is the camera constructed of metal but there are set screws that when tightened, prevents the camera aim from being tampered with. This is important for installation where the camera can be accessed.

ALL-METAL HOUSING

An all-metal housing creates a vandal-proof package that is resistant to physical damage.

SEALED DESIGN

The TX242 IP v3 is IP69K rated – Dust and Water Proof – For mounting on the exterior Of A Vehicle and withstanding powerful high-temperature water jets.

VIBRATION DAMPING

In order to help reduce camera vibration, a rubber mounting pad is supplied. The rubber pad is installed between the camera base and the mounting surface. The rubber pad conforms to the camera base for easy alignment and quick installation.

Video
     Imaging Sensor  2MP 1/2.8″ CMOS
     Resolution  1080p (1920 x 1080)
     S/N Ratio  Up to 48db (AGC off)
     Electronic Shutter  1/30 to 1/10,000
     Wide Dynamic Range  Yes – Wide Dynamic Range
     Frame  Up to 30 fps
     Video Compression  H.265, H.264
     Bit Rate  512Kbps to 8Mbps
     Dual Stream

Main:

1080p (1920 x 1080)

720p (1280 x 720)

D1 (720 x 480)

 Network
     Network Port RJ45 / M12 Female
     Network Protocol  HTTP, RTSP, RTCP, RTP, DHCP, DDNS, PPPoE, ONVIF Profile S-2.4
     Configuration  Built-in WEB server
 Audio  Built-in mic
 Housing  Gatekeeper’s TX camera housing
 Lenses Available  2.8mm, 4.0mm, 8.0mm
 Aperture  Fixed Aperture F1.8
 Power
     Voltage  POE12 (DC12V Nominal)/ 802.3af (DC48V Nominal)
     Consumption  <2.W (Day) <5W (Night)
 Physical
     Dimensions 4.3” L (10.9 cm) x 2.2” W (5.5 cm) x 3.8” H (9.5 cm)
     Weight  .5 lbs (227 g)
     IP Rating  IP69K
 Environmental
     Operating Temperature  -40°F to +158°F (-40°C to +70°C)
     Operating RH  Under 90% non-condensing

TX242 IP v3 Product Sheet