SUPERIOR HI-DEFINITION IMAGING

The W21 IP is a 720P High Definition, Wide Dynamic Range, low profile, colour day / night camera.  The camera produces stunningly clear images in the most demanding conditions.  A true wide dynamic rage camera using Sony internal electronics allows the camera to view both very dark areas (inside a vehicle) and very bright areas (outside a vehicle through an open door or window) in the same image.  White out caused by light entering the scene through a glass window or open door is completely eliminated.

Built rugged, the camera is designed to operate over the extreme temperatures and vibration found in vehicles.  The W21 IP metal housing makes the camera vandal resistant and when installed virtually immune to tampering.

The W21 IP camera is designed to be mounted externally, on the side of a vehicle either facing towards the front of the vehicle or towards the rear. It is ideally suited as an overview camera for the SP25.

Camera configuration is easy when used with Gatekeeper’s Hybrid Line of IP mobile DVR’s “fast setup” configuration feature.  No more struggling with IP addresses, subnets and default gateways to get the cameras to work.  This means that one does not have to have network training in order to install and maintain the system.

The W21 IP camera is plug and play compatible with Gatekeeper’s G4-Series IP DVRs with power over ethernet (PON 12VDC) and uses industry a standard RJ45 connection (no proprietary cabling) which allows the use of Cat 5 cabling between the camera and DVR.  Cable length of 15’, 30’ 45’ and 60’ with strain resistant over molded connectors are available.

The W21 IP is rated to operate from -40°F to +158°F, (-40°C to +70°C).

CAMERA – HOUSING FEATURES:

INTEGRATED IR

The integrated IR utilizes 15 infrared LED’s to provide IR illumination at night.  A sensor in the camera detects the ambient light and automatically turns on/off the IR LED’s as needed.

TAMPER PROOF ADJUSTMENTS

Not only is the camera constructed of metal, mounting screws are not visible which prevents the camera aim from being tampered with.  This is important for installation where the camera can be accessed, either due to low ceilings or accessible camera placement.

ALL METAL HOUSING

An all metal housing creates a vandal proof package that is resistant to physical damage.

SEALED DESIGN

The W21 IP is IP54 rated dust resistant and water spray resistant.

VIBRATION DAMPING

In order to help reduce camera vibration, a rubber mounting ring is supplied.  The rubber pad is installed between the camera base and the mounting surface.  The rubber ring conforms to the camera base for easy alignment and quick installation.