FS-6 Camera

Discreet. Super Compact. Stunning Video Quality.

  • Aesthetically pleasing surface or flush mount options
  • 700 TVL with 1/3” Sony Super HAD CCD camera
  • IP67 weatherproof
  • Vandal resistant metal-case with Polycarbonate dome

Discreet.  Super Compact.  Stunning Video Quality.

BusShotCam-FS6FLUSH-300dpi 2.5 in wideThe FS-6 camera is a small, attractive vandal resistant micro dome, specifically designed for applications where aesthetics are a key requirement. The FS-6 can be flush mounted so that only the 3/8” ring (9.5mm) and polycarbonate dome is visible. Approximately 1/8” (3.2mm) of the camera can be hidden behind the surface it is mounted to.

The FS-6 camera utilizes a Sony Super HAD 700 TVL color, day/night CCD with 10 integrated IR LEDs. The camera’s housing is metal and is built to survive in rugged and vandal susceptible environments. Vibration tested to Mil Spec 810F, the FS-6 camera is an excellent choice for both mobile and fixed environments where a small, low profile camera is needed and IR and audio are not required.

Generating a standard composite NTSC video signal the FS-6 camera is plug and play compatible with Gatekeeper Systems camera cabling system and older Gatekeeper DVR’s. The camera is available with 15’, 30’ or 60’ camera cables. Utilizing a Sony Effio Super HAD 1/3” CCD (Charge Coupled Device) imaging sensor the FS-6 provides class leading image quality.

The FS-6 has been built to operate in extreme environments that have significant shock and vibration and can operate in a temperature range of -22°F to +140°F, (-30°C to +60°C).

Camera – Features

Flush or Surface Mount

The FS-6 camera can be either flush mounted or surface mounted. This is extremely useful where aesthetics are a key requirement. If there is insufficient space behind the mounting location to recess the camera, 3 mounting adapter rings are available: 0 degrees, 15 degrees and 25 degrees.  These rings not only provide the mounting assembly to surface mount the camera, but also provide a tilted surface so that lens can be aimed at more acute angles. The 0° flush adapter base allows the camera to be aimed 55° from vertical, while the 15° adapter base allows the camera to be aimed up to 70° from vertical and the 25° adapter base allows the camera to be aimed up to 80° from vertical.

3D Gimbal

The housing inherently implements a 3D gimbal design found in more expensive cameras. This allows the base to be mounted in almost any orientation while allowing the camera to be adjusted so that the image is correctly oriented.

All Metal Housing

An all metal housing with a polycarbonate lens creates a vandal proof package that is resistant to physical damage.

Tamper Proof Adjustments

Not only is the camera constructed of metal, but there is a set screw, which when tightened, prevents the camera aim from being tampered with. This is important for installation where the camera can be accessed, either due to low ceilings or accessible camera placement.

Sealed Design – Water and Dust Proof

The ball that houses the camera electronics has no vents thus allowing the camera to have a rating of IP67.

     Imaging Sensor  Sony Super HAD II, 1/3” CCD
     Processor  Sony
     Minimum Illumination  0.3LUX/F1.2 (no IR)
     Resolution  700 TVL
     Effective Pixels  976(H) x 494(V)
     Video Output  1.0V P-P/75Ω, NTSC
     S/N Ratio  ≥120db (AGC off)
     Electronic Shutter  Automatic 1/60 to 1/10,000
     Gamma Correction  0.45
     AGC:  Auto
     White Balance  Auto
     BLC  Auto
     Capture Range  –
     Capture Speed  –
 Audio  Not Available
 IR  Not Available
 Housing  –
 Lenses Available  2.9mm, 3.6mm, 4.3mm and 6.0mm
     Voltage Consumption  12v nominal, ≤ 1W with IR on
     Dimensions  (Ø x H) 2.5” x 1.5” (63mm x 38mm)
     Weight  .3 lbs (136 g)
     Operating Temperature  -22°F to +140°F (-30°C to +60°C)
     Operating RH  Under 90% non-condensing
     Pan  ±180º
     Tilt  0º to 50º when flush mounted or using 0º surface mount adaptor
     Adaptor Plate  15º to 65º with 15º adaptor plate

25º to 75º with 25º adaptor plate

FS6 Product Sheet